| |
BOTE Ferrocut Oil 160
Description£º
BOTE Ferrocut Oil 160 is a water-miscible EP-coolant for machining operations. for examples, cast irons¡¢steel¡¢low carbon steel¡¢medium carbon steel¡¢high carbon steel¡¢alloy steels¡¢stainless steels. And much suitable for general maching¡¢cutting and grinding.
Application:
BOTE Ferrocut Oil 160 is an EP-coolant suitable for machining of aluminium alloys, for demanding operations on steel, cast iron and non ferrous metals.
BOTE Ferrocut Oil 160 emulsions feature a long time stability even under hot and humid weather conditions, contaminated mixing water and adverse machine surroundings.
Properties:
¡¤ semi-transparent, finely dispersed emulsion
¡¤ very low foaming
¡¤ excellent flushing effect
¡¤ special long-term stability, good sump life
¡¤ reliable long-time corrosion protection
¡¤ good skin tolerance
¡¤ pleasant smell
Technical Data: -
Concentrate |
Emulsion |
Viscosity
20¡ãC (mm2/s) |
Content of mineral oil
% |
pH-value
5 % |
Corrosion protection
4 % |
approx. 160 |
approx. 45 |
9.4 |
grade 0 |
Remarks£º
To prepare operating emulsion slowly add the coolant concentrate to drinking quality water assuring thorough mixing. Mixing can also be done by means of an automatic mixer. Recommended mixing ratios:
Machining of steel and non ferrous metals: from 4 %
Machining of cast iron and high tensile steel: from 5 %
Machining of aluminium alloys: from 5 %
The concentration of the operating emulsion can be determined by means of a pocket refractometer. The ¡ãBrix value multiplied by the re fractometer value equals the concentration in %. Sometimes reading of scale is more difficult with older emulsions because of the morecoarse dispersivity.
|
|
